Dynomotion

Group: DynoMotion Message: 5149 From: michaelthomasn Date: 6/6/2012
Subject: 24v opto inputs on Kanalog
Hi Tom,

Can the opto inputs on the Kanalog handle 24v without an additional series resistor?

That looks to be 55ma or so.

Thanks,

Mike
Group: DynoMotion Message: 5150 From: Tom Kerekes Date: 6/6/2012
Subject: Re: 24v opto inputs on Kanalog
Hi Michael,
 
Yes they can handle 24V without any additional series resistance.
 
The internal resistance is 10K ohms so that is less than 2.4ma.
 
Regards
TK 

Group: DynoMotion Message: 5151 From: Michael Niksch Date: 6/6/2012
Subject: Re: 24v opto inputs on Kanalog
Thanks


On Jun 6, 2012, at 5:24 PM, Tom Kerekes <tk@...> wrote:

 

Hi Michael,
 
Yes they can handle 24V without any additional series resistance.
 
The internal resistance is 10K ohms so that is less than 2.4ma.
 
Regards
TK